LAXO FLOOR/MAT CLEANER- Acidic

DESCRIPTION
LAXO Floor/Mat Cleaner is a superior, slightly concentrated thick liquid solution specifically de­signed to remove dust, grease, grime, shoe prints, and other contaminants from tiles, cemented floor and ESD floor mats. To apply the cleaner, the surface should be poured until slightly wet, then mopped the surface for some minutes and then rinse the surface thoroughly with water.


DIRECTIONS FOR USE

  1. Use a dust mop or broom to remove larger debris from the floor/mat.
  2. Pour Floor cleaner on floor/ mat till slightly wet.
  3. Mop/scrub for some minutes, rinse thoroughly and dry with a lint-free flat mop.
  4. No additional rinsing is required. For tougher stains increase the stay time or reapplication may be necessary.

ADVANTAGES AND CHARACTERISTICS

  • Ideal for the complete removal of dust, grease, grime, tough stains and other contaminations.
  • Acts quickly and thoroughly without the neces­sity for heating.
  • Applicable to all ferrous metal surfaces and parts, except stainless steel surfaces, those be­ing galvanized and those made of Tin, Zinc, Lead and Aluminum.
    Water–soluble, non-flammable and non-volatile.
  • Has no known effect on rubber and plastic.
  • Cost-effective, easy to apply and use.

PHYSICAL PROPERTIES

LAXO FLOOR CLEANER is a concentrated, non-vol­atile, acid-based, aqueous solution consisting of wetting agents and powerful against tough grimes
Appearance/Color: Clear, available in multicolor
Specific gravity: 1.20 gr/cm3 at 15’C
Solubility in water: Appreciable
pH (1% Solution): 0 – 2
Odour: non-pungent


PACKAGING

Container: Plastic jerry can.


APPLICATION AND USE
FOR GENERAL CLEANING on large surface areas, con­ventional means such as a brush, sponge or a mop with LAXO DESCALER LIQUID are suitable, either di­luted or not, depending on the degree of contami­nation and the kind or type of deposition. After the completion of the cleaning process, re­gardless of the method used, rinse with plenty of water and neutralize (only for the metal surface ar­eas) with 1% solution of ALKALINITY CONTROL. Note that during application inflammable and/or toxic gases may be liberated. In this case, adequate ventilation is necessary.


SAFETY AND HANDLING

HANDLING Use in well-ventilated areas; avoid breathing vapors. Keep containers closed when not in use. Avoid from freezing. Store in a cool, dry place with adequate ventilation. Keep from freezing – product may coagulate. Storage temperature: Max. 40°C
SAFETY FIRST AID MEASURES
Eye Contact Flush with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention
Skin Contact Wash with soap and water. If skin irritation occurs: Get medical advice/attention.
Inhalation Move subject to fresh air.
Ingestion Drink several glasses of water. DO NOT induce vomiting. Contact a physician.

 

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart

Mega Pack Homecare Bundle 15% Off

X
Scroll to Top