DESCRIPTION
LAXO Floor/Mat Cleaner is a superior, slightly concentrated thick liquid solution specifically designed to remove dust, grease, grime, shoe prints, and other contaminants from tiles, cemented floor and ESD floor mats. To apply the cleaner, the surface should be poured until slightly wet, then mopped the surface for some minutes and then rinse the surface thoroughly with water.
DIRECTIONS FOR USE
- Use a dust mop or broom to remove larger debris from the floor/mat.
- Pour Floor cleaner on floor/ mat till slightly wet.
- Mop/scrub for some minutes, rinse thoroughly and dry with a lint-free flat mop.
- No additional rinsing is required. For tougher stains increase the stay time or reapplication may be necessary.
ADVANTAGES AND CHARACTERISTICS
- Ideal for the complete removal of dust, grease, grime, tough stains and other contaminations.
- Acts quickly and thoroughly without the necessity for heating.
- Applicable to all ferrous metal surfaces and parts, except stainless steel surfaces, those being galvanized and those made of Tin, Zinc, Lead and Aluminum.
Water–soluble, non-flammable and non-volatile. - Has no known effect on rubber and plastic.
- Cost-effective, easy to apply and use.
PHYSICAL PROPERTIES
LAXO FLOOR CLEANER is a concentrated, non-volatile, acid-based, aqueous solution consisting of wetting agents and powerful against tough grimes
Appearance/Color: Clear, available in multicolor
Specific gravity: 1.20 gr/cm3 at 15’C
Solubility in water: Appreciable
pH (1% Solution): 0 – 2
Odour: non-pungent
PACKAGING
Container: Plastic jerry can.
APPLICATION AND USE
FOR GENERAL CLEANING on large surface areas, conventional means such as a brush, sponge or a mop with LAXO DESCALER LIQUID are suitable, either diluted or not, depending on the degree of contamination and the kind or type of deposition. After the completion of the cleaning process, regardless of the method used, rinse with plenty of water and neutralize (only for the metal surface areas) with 1% solution of ALKALINITY CONTROL. Note that during application inflammable and/or toxic gases may be liberated. In this case, adequate ventilation is necessary.
SAFETY AND HANDLING
| HANDLING | Use in well-ventilated areas; avoid breathing vapors. Keep containers closed when not in use. Avoid from freezing. Store in a cool, dry place with adequate ventilation. Keep from freezing – product may coagulate. Storage temperature: Max. 40°C |
| SAFETY | FIRST AID MEASURES |
| Eye Contact | Flush with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention |
| Skin Contact | Wash with soap and water. If skin irritation occurs: Get medical advice/attention. |
| Inhalation | Move subject to fresh air. |
| Ingestion | Drink several glasses of water. DO NOT induce vomiting. Contact a physician. |